Fliesen gespalten Kavala Schiefer
Tiles Split Kavalas Slate
Material: natural Kavala shale.
Surface: natural.
Dimensions: 10 x random free length
Available thickness:
1) 3-5cm
2) 5-7cm
3) 7-10cm
Αlso available:
15cm x Free Length
thickness 3-5cm
20cm x Free Length thickness 3-5cm
The above dimensions may vary, due to the nature of the materials and its special processing.
Uses: coating of floors in outdoor spaces such as town squares, yards, pavement slabs, corridors, traditional pedestrian roads, cobblestone areas, parking, garages, tiling with paving blocks etc.
VERFÜGBARKEIT
WUSSTEN SIE?
FLIESEN GESPALTEN KAVALA SCHIEFER
Tiles Split Kavalas Slate are made of Kavalas shale extracted from the quarries located at the edges of the historic Paggaio mountain in northern Greece, in the Municipality of Kavala. This was the mountain where King Philip II owned gold mines that were used to financially support the military campaign of his son, Alexander the Great.
It is a hard rock, very resilient to time and frost, with a low degree of weathering and an anti-slip surface.
The four sides along its perimeter are broken using a press and the two larger sides are natural.
Our company has obtained a special CE marking for this product.
LAYING PAVING BLOCKS ON A CONCRETE SURFACE
1) We need a durable base of reinforced concrete on which the paving blocks will be laid.
2) They are bonded using cement mud and ensuring that the flatter and straighter surfaces are placed facing upwards, with the inclination we desire.
3) No gaps must be left during encasing.
4) Care must be taken to ensure that the mud does not stain the visible upper surface. If this occurs, the stain must be immediately cleaned using a sponge and water before it dries.
5) The width and depth of the joint depends on personal taste, but in general the width ranges between 1 and 2cm and the depth ranges between 0 and 1cm (a smaller depth results in a smoother surface).
6) Joints must be free of holes and cracks.
There are various installation schemes, e.g. parallel or diagonal lines, semi-circles etc. Other installation methods exist, however we believe that the one described is the simplest and most practical one.
Very thick paving blocks may be placed directly on the soil, without requiring concrete or cement mud for bonding. In this case, a different technique is required for the substrate and the installation.
In all cases, installation must be performed by experienced qualified technicians.
Projekte
Wir präsentieren Ihnen unsere besten Produkte. Bitte sehen Sie unten unsere Vorschläge.
SIEHE ALLE PRODUKTE
Informationen
Lesen Sie hier nützliche Informationen über unsere Produkte.
OTHER DENOMINATIONS
The product is also available in the market under the following denominations: natural grey Kavala paving block, natural grey Eleftheroupolis paving block 10xFL, natural grey Paggaio paving block, natural grey Akrovounio paving block, Kavala pressed paving block 10xF.L. , paving using grey stone paving blocks, cobblestone pavements, grey stone Kavala paving block 10xFL, grey stone paving block, grey paving block made of natural stone, cobbles granite grey, cobble Kavala, cobbles grey 10xFL, Tiles Split Slates kavalas, split tiles Grey, split natural tiles Kavalas, split cut rectangular tiles Kavalas, grey free length tiles, grey kavalas tiles